
Add to Cart
0.25 tons double stage reverse osmosis (RO) water treatment equipment
Parameter Table
Model | Water Making Ability | Inlet Caliber | Effluent Caliber | Blowdown alCer | Size(mm) | Power |
YSRO-0.5T | 0.5m3/h | DN20 | DN20 | DN15 | 1500×600×1500 | 1.3kw |
YSRO-1T | 1m3/h | DN25 | DN25 | DN20 | 1700×600×1500 | 2.1kw |
YSRO-2T | 2m3/h | DN32 | DN25 | DN20 | 2500×1000×1950 | 4.4kw |
YSRO-3T | 3m3/h | DN40 | DN32 | DN25 | 2500×1200×2150 | 4.5kw |
YSRO-5T | 5m3/h | DN50 | DN40 | DN32 | 2500×1350×2150 | 7.0kw |
YSRO-8T | 8m3/h | DN50 | DN50 | DN40 | 3500×1500×2150 | 11kw |
YSRO-10T | 10m3/h | DN50 | DN50 | DN40 | 3500×1600×2300 | 15kw |
Technical parameter
Inlet pressure: usually between 0.2 and 0.3MPa.
Operating pressure: about 0.6~1.5MPa, to ensure that water can smoothly pass through the reverse osmosis membrane.
Desalting rate: more than 99%, effectively remove salt and other soluble impurities from the water.
Water yield: 250L/H, that is, 250 elevated purity water per hour.
Conductivity of water production: usually less than 5μs/cm (depends on raw water quality)
,
Packaging and transportation
FAQ
3. What is the daily maintenance of water treatment equipment?