Jingte 'er Environmental Protection Engineering Co.,Ltd
Manufacturing must rely on low cost, competition depends on high quality.
Add to Cart
Sea Water Filter Equipment Desalination RO Treatment Plant, Reverse Osmosis Water Purification System
Production Description
Pretreatment three-tank process flow:
Raw water tank-raw water pump-quartz sand filter-activated carbon filter-resin softener-security filter-high pressure pump-RO reverse osmosis system-pure water tank
Parameter Table
| Model | Water Making Ability | Inlet Caliber | Effluent Caliber | Blowdown alCer | Size(mm) | Power |
| YSRO-0.5T | 0.5m3/h | DN20 | DN20 | DN15 | 1500×600×1500 | 1.3kw |
| YSRO-1T | 1m3/h | DN25 | DN25 | DN20 | 1700×600×1500 | 2.1kw |
| YSRO-2T | 2m3/h | DN32 | DN25 | DN20 | 2500×1000×1950 | 4.4kw |
| YSRO-3T | 3m3/h | DN40 | DN32 | DN25 | 2500×1200×2150 | 4.5kw |
| YSRO-5T | 5m3/h | DN50 | DN40 | DN32 | 2500×1350×2150 | 7.0kw |
| YSRO-8T | 8m3/h | DN50 | DN50 | DN40 | 3500×1500×2150 | 11kw |
| YSRO-10T | 10m3/h | DN50 | DN50 | DN40 | 3500×1600×2300 | 15kw |
Key advantages
High degree of automation: the system adopts automatic control, which can reduce manual intervention and improve operation efficiency.
Energy saving and environmental protection: The system has low energy consumption and does not need to use a large number of chemical agents, which meets the requirements of environmental protection.
Maintance
Open the inlet valve and outlet valve of chemical cleaning, start the chemical cleaning pump, and circulate the cleaning for 1 hour.
Measure the pH in the bucket every ten minutes for three consecutive times until there is no significant change in the pH for three consecutive times.
Flush with water that meets the inlet water index of reverse osmosis. In order to prevent precipitation, the low-pressure flushing temperature is 20 ℃ until the pH and conductivity of the water discharged from the cleaning outlet are close to the inlet water index.
Product Display
