10 tons of single-stage reverse osmosis Water Treatment Equipment for Large-Scale Production

10 tons of single-stage reverse osmosis Water Treatment Equipment for Large-Scale Production

Product Description

10T/H reverse osmosis water purification equipment adopts mechanical filtration and activated carbon filtration as the pre-treatment, which effectively removes the impurities such as suspended solids, sediment particles, organic colloids, organic matter, odor, residual chlorine and so on, and uses the program-controlled reverse osmosis device as the pre-desalination, which removes most of the dissolved salts in the raw water, bacteria, heat sources and so on, so as to ensure that the quality of the finished water is up to the standard. The system has two modes: automatic and manual. The automatic programmed control system adopts the traditional relay as the central control element, and realizes the automatic operation of the system through the combination of multi-point and multi-channel water level sensors and dynamic pressure controllers. Manual mode can be used for installation and maintenance or automatic control system failure.

Parameter Table

Working Principle

Reverse osmosis is a kind of reverse migration movement of osmosis, is a kind of pressure-driven without the help of semi-permeable membrane selective retention of solutes in the solvent and solvent separation method, which has been widely used in a variety of solution purification and concentration, which is a common example of application is the use of reverse osmosis technology in the water treatment process to remove ions, bacteria, viruses, organic matter and colloid and other impurities, so as to obtain high quality of pure water. Pure water.

Maintenance

1,Pre-treatment of raw water: in order to avoid clogging the reverse osmosis system, the raw water should be pre-treated to eliminate the suspended matter in the water and reduce the turbidity of the water;

2,Solutes and water are separated under the condition of no phase change at room temperature, which is suitable for the separation and concentration of heat-sensitive substances, and the energy consumption is lower compared with the separation method with phase change;

3,Higher desalination rate and water reuse rate, can retain solutes with particle size of several nanometers or more;

4, reverse osmosis membrane separation technology impurity removal range;
Determine the amount of industrial water per hour there is another reason for pure water equipment out of the pure water can not be placed too long, placed too long will make the water resistivity and conductivity changes.

Product Display