1 Ton Of Unipolar Reverse Osmosis Water Treatment Equipment For African Core Components

1 ton of unipolar reverse osmosis water treatment equipment for African Core Components

Product Description

Simply put, it is through the electricity, the concentrated solution to apply pressure, change the original direction of penetration, realize the concentrated solution countercurrent, so as to purify the concentrated solution, produce pure water. At the same time also produce water part of the concentrated water, this concentrated water is what we often call wastewater, in fact, concentrated water in addition to salt content than tap water is slightly higher than most of the other indicators are much better than tap water, after all, it has gone through the first three filtration. May be utilized for other purposes, such as mopping the floor, flushing the toilet, washing things, watering flowers, etc., or to do recycling pipeline, re-use. The reverse osmosis membrane used in the reverse osmosis equipment is an ultra-low-pressure rolled membrane, when the raw water is sent to the reverse osmosis membrane at a certain pressure, the water passes through the tiny aperture on the membrane, and is collected to get pure water, while the impurities in the water, such as soluble solids, organics, colloidal substances and bacteria are retained by the reverse osmosis membrane, and are concentrated in the intercepted liquid and removed.

Parameter Table

Key Advantage

Its main role is to reduce the pollution index of raw water and other impurities such as residual chlorine, to achieve the feed water requirements of reverse osmosis.1 ton reverse osmosis equipment performance and advantages Continuous operation, stable product water quality. No need to regenerate with acid and alkali. Saves backwash and cleaning water

Maintenance

Regularly check the operation of each pump and replace the lubricating oil in due time. Regularly check the electrical control system to ensure the normal operation of the equipment. Regular replacement of quartz sand and activated carbon filter media, it is recommended that the sand and carbon be replaced every 8-12 months, the specific replacement cycle according to the quality of raw water and equipment operation conditions shall prevail. Regeneration of softener is carried out automatically according to the automatic controller of multi-way valve. Pay attention to the regular addition of salt and brine concentration to ensure the regeneration effect.

Product Display