Jingte 'er Environmental Protection Engineering Co.,Ltd
Manufacturing must rely on low cost, competition depends on high quality.
Add to Cart
Softening Filter Equipment For Well Water Sand Carbon Filter Industry Purifier
Working principle:
The hardness of water is mainly composed of calcium, magnesium and ions. When the raw water containing hardness ions passes through the resin layer in the water softener, the calcium, magnesium and ions in the water are exchanged and adsorbed by the resin, and the sodium ions are released at the same time. The water that flows out of the water softener is the softened water that has removed the hardness ions. When the resin absorbs a certain amount of calcium and magnesium ions, it must be regenerated.
Key Advantages:
High degree of automation soft water processor can be timed, fixed flow automatic regeneration, effluent water quality is stable
Low operating costs Water consumption < 5-10% water production, regeneration of 1 liter of resin requires about 100-160 grams of salt consumption
Flexible selection can choose the dual tank, multi-tank system, time, flow control mode, simultaneous regeneration, alternate regeneration and other operating modes
Reasonable design, delicate configuration, high softening efficiency
Maintance:
To disassemble the water softerer once, clean up the impurities in the water distributor and the quartz sand mat, and check the loss and exchange capacity of the resin, replace the seriously aging resin, and use hydrochloric acid solution to resuscitate the poisoned resin. Ensure the stability of the input voltage and current of the water softener to prevent the burning of the electronic control device. A sealing cover should be installed outside the electronic control device to prevent moisture and water.
Picture:
